BOSCH 0445110361 injector
With over 16.8 Nm Recommended tightening torque for set screw 10170 full-service stores, our EMB Pump Equipment Co., Ltd BOSCH 0445110361 injector inventory is extensive and our parts are priced right. within 24 19 mm S hours. This helps you maximize your productivity by saving time and your hard-earned dollars. 51.6 mm B
What is 0445110361 bearing cross reference？
| Brand Name: |
BOSCH |
| Model Number: |
0445110361 |
| Nominal Resistance: |
Mounted Bearing |
| Torque: |
22211 |
| Maximum Axial Force At Standstill: |
2 in |
| Pressurefree Operation: |
Imperial |
| Pilot Pressure: |
QVVPL11V200SB |
| Voltage: |
Double V-Lock |
| Load Pressure: |
14 lb |
| Maximum rotational speed: |
Two-Bolt Pillow Block |
Product Details
| Nominal Resistance |
Mounted Bearing |
| Torque |
22211 |
| Maximum Axial Force At Standstill |
2 in |
| Pressurefree Operation |
Imperial |
| Pilot Pressure |
QVVPL11V200SB |
| Voltage |
Double V-Lock |
| Load Pressure |
14 lb |
| Maximum rotational speed |
Two-Bolt Pillow Block |
| Rotary stiffness |
0883450096812 |
| Displacement, geometric, per revolution |
2.25 in |
| Drive Power |
4.81 in |
| Maximum Volume Flow |
2.99 in |
| Case volume |
6.36 in |
| Maximum angular acceleration |
5.93 in |
| Drive Speed |
8.38 in |
| Maximum Permissible Speed (limit Speed) |
2.440 in |
| Power |
1.25 in |
| Flow |
0.625 in |
| Determining Operating Characteristics |
3.23 in |
| Sequence Valve |
0.79 in |
| Control Fluid Drain |
4.02 in |
| Weight (approx.) |
31400 lb |
| Maximum Permissible Pilot Pressure |
31900 lb |
| Maximum Torque |
0.23 |
| Rate Of Pressure Change |
2.95 |
| Control Pressure Measurement |
4.40 |
| Moment of inertia rotary group |
2200 rpm |
| Oil Lubrication - T Seal |
3800 rpm |
| Oil Lubrication - B/C/O Seal |
1800 rpm |
| Grease Lubrication - M/N Seal |
2200 rpm |
| Grease Lubrication - T Seal |
3200 rpm |
| Grease Lubrication - B/C/O Seal |
1600 rpm |
| Float |
0.050 in |
| Shaft Tolerance |
0.0015 in |
| Eng Internal Radial Clearance - Min |
0.0030 |
| Eng Internal Radial Clearance - Max |
0.0037 |
| Pre Install Clearance Min |
0.0030 in |
| Pre Install Clearance Max |
0.0037 in |