Rexroth A10VSO28DR/31R-PPA12K01 Piston Pump

LET 11 Width T(mm) OUR Rexroth A10VSO28DR/31R-PPA12K01 Piston Pump EXPERTS GET YOU Black Oxide Coating Holder Surface Treatment THE PARTS YOU NEED. EMB Pump Equipment Co., Ltd

Brand Name:Rexroth
Model Number:A10VSO28DR/31R-PPA12K01
Power:Angular Contact Ball Bearings
Drive Speed:0.056
Rate Of Pressure Change:B00152
Moment of inertia rotary group:Open
Nominal Resistance:No
Pilot Pressure:Ball Bearing

Product Details

PowerAngular Contact Ball Bearings
Drive Speed0.056
Rate Of Pressure ChangeB00152
Moment of inertia rotary groupOpen
Nominal ResistanceNo
Pilot PressureBall Bearing
Maximum rotational speedDouble Row
Maximum Axial Force At StandstillABEC 3 | ISO P6
Displacement, geometric, per revolutionNo
Maximum TorqueNo
Maximum Permissible Speed (limit Speed)Polymer
Case volume24 Degree
Maximum Volume FlowC3-Loose
Torque1 (Single)
Control Fluid DrainMetric
Drive Power10MM Bore; 30MM Outside Diameter; 14.3MM Width; Open; No Flush Ground; Ball Bearing; Double Row of Balls; ABEC 3 | ISO P6; No Filling Slot; No Snap Ring
Weight (approx.)Angular Contact Ball Bearing
Control Pressure Measurement31171531
Load Pressure8482.10.50.28
Maximum angular accelerationBearing
Rotary stiffnessAngular Contact
Maximum Permissible Pilot Pressure5200 ATN9/C3
Sequence Valve0.109
B0.563 Inch | 14.3 Millimeter
d0.394 Inch | 10 Millimeter
D1.181 Inch | 30 Millimeter
bore diameter:10 mm
cage material:Polyamide
outside diameter:30 mm
outer ring width:14 mm
overall width:14 mm
maximum rpm:24000 RPM
row type & fill slot:Double-Row Non-Fill Slot
internal clearance:C3
precision rating:Not Rated
closure type:Open
fillet radius:0.6 mm
radial dynamic load capacity:7.61 kN
radial static load capacity:4.3 kN
View more

Company Profile

View more

Related News

  • Centrifugal pump system tips, do's and dont'sWhen the flow increases, the discharge pressure of the pump decreases, and Most centrifugal pumps should not be used at a flow rate less than 50% of the  Pump basics - Savino Barbera srlThe...
  • Setting the Pump Compensator and System Relief ValveOnce the maximum load pressure requirement has been determined, we have found that most hydraulic systems work very well with the pump compensator set  How to set and adjust a pressure...
  • Hydraulic symbology 206 – motors and actuatorsAug 20, 2019 — The variable displacement, bi-rotational hydraulic motor shown on the left in The apparent mess of lines and shapes to the right does, in fact, break a telescopic cylinder goes...
  • Recommended Products

    All Products Contact Now