DEUTZ 445120066 injector
DEUTZ 445120066 injector Engineering Calculator , DEUTZ injector Manufacturing 200.0000 mm D Service . EMB Pump Equipment Co., Ltd Get 96.00 mm B Your 365000 N Basic Static Radial Load Rating Co Free.
| Brand Name: | DEUTZ |
| Model Number: | 445120066 |
| Sequence Valve: | Angular Contact Ball Bearings |
| Maximum rotational speed: | 0.0 |
| Control Pressure Measurement: | N/A |
| Weight (approx.): | 1.799 |
| Torque: | B00308 |
| Control Fluid Drain: | Open |
| Pressurefree Operation: | No |
| Maximum Permissible Speed (limit Speed): | Ball Bearing |
Product Details
| Sequence Valve | Angular Contact Ball Bearings |
| Maximum rotational speed | 0.0 |
| Control Pressure Measurement | N/A |
| Weight (approx.) | 1.799 |
| Torque | B00308 |
| Control Fluid Drain | Open |
| Pressurefree Operation | No |
| Maximum Permissible Speed (limit Speed) | Ball Bearing |
| Drive Power | Single Row |
| Nominal Resistance | ABEC 1 | ISO P0 |
| Power | Yes |
| Maximum Axial Force At Standstill | No |
| Maximum angular acceleration | Brass |
| Pilot Pressure | 40 Degree |
| Flow | C0-Medium |
| Rotary stiffness | 1 (Single) |
| Case volume | Metric |
| Load Pressure | 60MM Bore; 130MM Outside Diameter; 31MM Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; Yes Filling Slot; No Snap Ring; C0-Medium; Brass Cage; 40 Degree; 1 (Single) |
| Voltage | Angular Contact Ball Bearing |
| Maximum Torque | 31171531 |
| Maximum Permissible Pilot Pressure | 8482.10.50.28 |
| Moment of inertia rotary group | Bearing |
| Maximum Volume Flow | Angular Contact |
| Drive Speed | 3.88 |
| Displacement, geometric, per revolution | 2.362 Inch | 60 Millimeter |
| B | 1.22 Inch | 31 Millimeter |
| D | 5.118 Inch | 130 Millimeter |
| d - Bore | 60 mm |
| D - Outer Diameter | 130 mm |
| Bearing Width | 31 mm |
| do - Ball Diameter | 22.225 mm |
| C0 - Static Radial Rating | 64800 N |
| Ce - Dynamic Radial Rating1 | 101000 N |
| Limiting Speed (Grease) | 3690 rpm |
| Limiting Speed (Oil) | 4220 rpm |
| Ball Type | STEEL |
| Cage Type | Ball Piloted, Pressed Brass Cage |
| Bearing Weight | 1.969 Kg |
| Design Units | METRIC |
| R - Inner Ring To Clear Radius2 | 2.0 mm |
| r - Outer Ring To Clear Radius3 | 2.0 mm |
| da - Inner Ring Backing Diameter | 72.100 mm |
| Da - Outer Ring Backing Diameter | 118.100 mm |